E3D Revo CR upgrade kit | 12V | 1.75mm (0.4mm nozzle)

With the E3D Revo CR upgrade kit you are able to change the nozzle without the use of tools. The improved heatsink also ensures that printing can be done with a maximum temperature of 300ᵒC. The set includes a 12V Revo CR hot end with an interchangeable 0.4mm nozzle.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.
 

Compatible with the following printers:
	●	CR-10 Mini	●	CR-10S4
	●	CR-10	●	CR-10S5
	●	CR-10S

Just because a printer isn't on the list doesn't mean it won't work with Revo CR. As soon as we have confirmation of compatibility with other Creality printers, the list will be expanded.

Thanks to the Creality-specific thermistor, the Revo CR is compatible with the firmware on almost any standard Creality printer. However, you may need to replace/modify parts for full use.