View all water resistant filaments

73 - 96 of 155

colorFabb semi-matte black PETG filament 1.75mm, 0.75kg

Description

Print strong objects with colorFabb PETG filament in the colour black with semi-matte effect. The matte black colour provides a luxurious finish to prints. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves the printing process. In addition, PETG is easy to print and no fibers are used to obtain the semi-matte effect. The filament has a diameter of 1.75mm and a weight of 0.75kg. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	0.75 kg	Material:	PETG Semi-mat
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	black	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13195
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	60 - 70 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Amount:

Filament diameter:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb semi-matte black PETG filament 1.75mm, 2.2kg

Zoom in

Description

Read more about printing with PETG filament here.

Specifications

Amount:	2.2 kg	Material:	PETG Semi-mat
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	235 - 255 °C
Filament diameter:	1.75 mm	Our item no:	DFP13197
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70 - 80 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

Amount:

Filament diameter:

€87.75

€71.34 Excl. 23% VAT

EU warehouse

eSun transparent blue PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's transparent blue filament is a high-quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20209
Colour:	blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Re-fill

Colour:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun transparent blue PETG filament 1.75mm, 1kg

Zoom in

Description eSun's transparent blue PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20046
Colour:	transparent blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

Filament diameter:

Order now, we can ship this on Monday!

€31.50

€25.61 Excl. 23% VAT

In stock

eSun transparent green PETG filament 1.75mm, 1kg

Zoom in

Description eSun's transparent green PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20047
Colour:	transparent green	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

€31.50

€25.61 Excl. 23% VAT

EU warehouse

eSun transparent PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's transparent filament is a high-quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20212
Colour:	transparent	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Re-fill

Colour:

Order now, we can ship this on Monday!

€24.50

€19.92 Excl. 23% VAT

In stock

eSun neutral PETG filament 1.75mm, 1kg

Zoom in

Description eSun's neutral PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20045
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

EU warehouse

eSun transparent orange PETG filament 1.75mm, 1kg

Zoom in

Description eSun's transparent orange PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20050
Colour:	transparent orange	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

€31.50

€25.61 Excl. 23% VAT

EU warehouse

eSun black PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's black filament is a high quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20208
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Re-fill

Colour:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun solid black PETG filament 1.75mm, 1kg

Zoom in

Description eSun's solid black PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20044
Colour:	solid black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

EU warehouse

eSun grey PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's grey filament is a high-quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20210
Colour:	grey	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Re-fill

Colour:

Variant:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun solid red PETG filament 1.75mm, 1kg

Zoom in

Description The plain red PETG filament from eSun is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20043
Colour:	even red	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

Filament diameter:

Order now, we can ship this on Monday!

€30.50

€24.80 Excl. 23% VAT

In stock

eSun white PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's white filament is a high quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20216
Colour:	white	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Re-fill

Colour:

Variant:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun white PETG filament 1.75mm, 1kg

Zoom in

Description eSun's white PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20051
Colour:	white	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

Filament diameter:

Variant:

Order now, we can ship this on Monday!

€31.50

€25.61 Excl. 23% VAT

In stock

Polymaker Fiberon black PETG-ESD filament 1.75mm, 0.5kg

Zoom in

Description With PolyMax Tough PETG-ESD filament you can benefit from even better mechanical properties compared to normal PETG. The added carbon nanotubes make it ESD safe. This means that the transfer of static electricity is reduced and damage to products can be prevented. This makes Tough PETG-ESD perfect for use in combination with electronics.

If you want to make a very strong print with high layer adhesion, it is recommended to turn the fan off when printing with this filament. If you prefer a print with a high-quality finish, it is recommended to turn the fan on. For a happy medium, it is best to run the fan at 20%.

Specifications

Amount:	0.5 kg	Nozzle temp range:	250 - 290 °C
Brand:	Polymaker	Our item no:	DFP14549
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	5.2 cm
Material:	PETG-ESD

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Order now, we can ship this on Monday!

€48.50

€39.43 Excl. 23% VAT

In stock

Polymaker PolyLite black ASA filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite black ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14054
Colour:	black	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 95 °C	Spool width:	6.8 cm
Material:	ASA

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Polymaker PolyLite black ASA filament 1.75mm, 3kg

Zoom in

Description This black Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	3 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14180
Colour:	black	Spool empty weight:	± 440 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Filament print speed:	-	Outer diameter:	Ø 25.2 cm
Heated bed temp:	75 - 95 °C	Spool width:	11.9 cm
Material:	ASA

€92.50

€75.20 Excl. 23% VAT

EU warehouse

Polymaker PolyLite blue ASA filament 1.75mm, 1kg

Zoom in

Description This blue Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14181
Colour:	blue	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 95 °C	Spool width:	6.8 cm
Material:	ASA

Order now, we can ship this on Monday!

€37.50

€30.49 Excl. 23% VAT

In stock

Polymaker PolyLite grey ASA filament 1.75mm, 1kg

Zoom in

Description This grey Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14183
Colour:	grey	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 95 °C	Spool width:	6.8 cm
Material:	ASA

Order now, we can ship this on Monday!

€37.50

€30.49 Excl. 23% VAT

In stock

Polymaker PolyLite natural ASA filament 1.75mm, 1kg

Zoom in

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14185
Colour:	natural	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 95 °C	Spool width:	6.8 cm
Material:	ASA

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Polymaker PolyLite red ASA filament 1.75mm, 1kg

Zoom in

Description This red Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14189
Colour:	red	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 95 °C	Spool width:	6.8 cm
Material:	ASA

Order now, we can ship this on Monday!

€37.50

€30.49 Excl. 23% VAT

In stock

Polymaker PolyLite white ASA filament 1.75mm, 1kg

Zoom in

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95°C.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14056
Colour:	white	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 95 °C	Spool width:	6.8 cm
Material:	ASA

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Polymaker PolyLite white ASA filament 1.75mm, 3kg

Zoom in

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	3 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14190
Colour:	white	Spool empty weight:	± 440 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Filament print speed:	-	Outer diameter:	Ø 25.2 cm
Heated bed temp:	75 - 95 °C	Spool width:	11.9 cm
Material:	ASA

€92.50

€75.20 Excl. 23% VAT

EU warehouse

Polymaker PolyLite black PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a black colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14194
Colour:	black	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG