Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

123-3D BK/GRY/W/R/B PLA filament bundle 1.75mm, 1.1kg Total 5.5kg of filament!

123-3D BK/GRY/W/R/B PLA filament bundle 1.75mm, 1.1kg DFE00054

Description The 123-3D own-brand PLA starter pack consists of the 5 most popular standard colours of our new improved 123-3D filament. 123-3D filaments guarantee quality, reliability and good performance.

The colours in our package are: black, grey, white, red and blue.

Normally €122.50, now only €99.45 !!

Specifications

Amount:	5.5 kg	Nozzle temp range:	195-215 °C
Brand:	123-3D	Our item no:	DFE00054
Colour:	multi colour	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-55 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€117.00 (coming soon) (Incl. 23% VAT)
( €95.12 Excl. 23% VAT )

123-3D black PLA filament 1.75mm, 1.1kg

Zoom in

Description Our black 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01091
Colour:	black	RAL colour no:	9017
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€24.50 (coming soon) (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

123-3D black PLA filament 1.75mm, 3kg

Zoom in

Description Our black 1.75mm PLA filament has been improved! It has an improved composition and is better wound on the spool but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers.

Read more about printing with PLA filament here.

Specifications

Amount:	3 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01092
Colour:	black	RAL colour no:	9017
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 30.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	10.0 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€49.50 (Incl. 23% VAT)
( €40.24 Excl. 23% VAT )

5-7 day delivery

123-3D white PLA filament 1.75mm, 1.1kg

Zoom in

Description Our white 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01084
Colour:	white	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D white PLA filament 1.75mm, 3kg

Zoom in

Description Our white 1.75mm PLA filament has been improved! It has an improved composition and is better wound on the spool but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers.

Read more about printing with PLA filament here.

Specifications

Amount:	3 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01085
Colour:	white	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 30.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	10.0 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€49.50 (Incl. 23% VAT)
( €40.24 Excl. 23% VAT )

5-7 day delivery

123-3D white PLA filament bundle 1.75mm, 1.1kg Total 5.5kg of filament!

123-3D white PLA filament bundle 1.75mm, 1.1kg DFE00051

Zoom in

Description The 123-3D own-brand PLA bulk pack (Jupiter series) consists of 5 x 1.1kg spools of our new improved white 123-3D filament. 123-3D filaments guarantee quality, reliability and good performance. Total 5.5kg.

Normally €122.50, now only €99.45 !!

Specifications

Amount:	1.1 kg	Nozzle temp range:	195-215 °C
Brand:	123-3D	Our item no:	DFE00051
Colour:	white	Quantity:	5
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.2 cm
Length:	330 m	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€117.00 15% discount: €99.45 (Incl. 23% VAT)
( €80.85 Excl. 23% VAT )

in stock

123-3D snow white PLA filament 1.75mm, 1.1kg

Zoom in

Description Our snow white 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01082
Colour:	snow white	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D cream white / pearl white PLA filament 1.75mm, 1.1kg

Zoom in

Description Our cream white/pearl white 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01080
Colour:	Crèmewit / Parelwit	RAL colour no:	9001
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D grey PLA filament 1.75mm, 1.1kg

Zoom in

Description Our grey 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01050
Colour:	grey	RAL colour no:	7011
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D grey PLA filament 1.75mm, 3kg

Description Our grey 1.75mm PLA filament has been improved! It has an improved composition and is better wound on the spool but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers.

Read more about printing with PLA filament here.

Specifications

Amount:	3 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01051
Colour:	grey	RAL colour no:	7011
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 30.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	10.0 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€49.50 (Incl. 23% VAT)
( €40.24 Excl. 23% VAT )

in stock

123-3D grey PLA filament bundle 1.75mm, 1.1kg Total 5.5kg of filament!

123-3D grey PLA filament bundle 1.75mm, 1.1kg DFE00052

Zoom in

Description The 123-3D own-brand PLA bulk pack (Jupiter series) consists of 5 x 1.1kg spools of our new improved grey 123-3D filament. 123-3D filaments guarantee quality, reliability and good performance. Total 5.5kg.

Normally €122.50, now only €99.45 !!

Specifications

Amount:	1.1 kg	Nozzle temp range:	195-215 °C
Brand:	123-3D	Our item no:	DFE00052
Colour:	grey	Quantity:	5
Filament diameter:	1.75 mm	RAL colour no:	-
Heated bed temp:	0-55 °C	Roundness:	above 95 percent
Length:	330 m	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€117.00 15% discount: €99.45 (Incl. 23% VAT)
( €80.85 Excl. 23% VAT )

in stock

123-3D light grey PLA filament 1.75mm, 1.1kg

Zoom in

Description Our light grey 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01053
Colour:	light grey	RAL colour no:	7035
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D red PLA filament 1.75mm, 1.1kg

Zoom in

Description Our red 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01069
Colour:	red	RAL colour no:	3020
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D red PLA filament 1.75mm, 3kg

Zoom in

Description Our red 1.75mm PLA filament has been improved! It has an improved composition and is better wound on the spool but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers.

Read more about printing with PLA filament here.

Specifications

Amount:	3 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01070
Colour:	red	RAL colour no:	3020
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 30.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	10.0 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€49.50 (Incl. 23% VAT)
( €40.24 Excl. 23% VAT )

in stock

123-3D dark blue PLA filament 1.75mm, 1.1kg

Zoom in

Description Our dark blue 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01032
Colour:	dark blue	RAL colour no:	5002
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D dark blue PLA filament 1.75mm, 3kg

Description Our dark blue 1.75mm PLA filament has been improved! It has an improved composition and is better wound on the spool but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers.

Read more about printing with PLA filament here.

Specifications

Amount:	3 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01033
Colour:	dark blue	RAL colour no:	5002
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 30.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	10.0 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€49.50 (Incl. 23% VAT)
( €40.24 Excl. 23% VAT )

in stock

123-3D sky blue PLA filament 1.75mm, 1.1kg

Zoom in

Description Our sky blue 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01036
Colour:	sky blue	RAL colour no:	5015
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

5-7 day delivery

123-3D bronze Metal Pro filament 1.75mm, 1kg

Zoom in

Description Bronze filament from the Metal series of 123-3D.ie contains about 80% bronze. The filament is based on PLA, but is about three times heavier. 3D printed objects have the look & feel of real bronze: they feel cool and solid.

3D printing with bronze filament is problem-free with both a Direct and Bowden extruder (nozzle diameter of at least 0.50mm). Objects printed with bronze can be easily reworked, sanded and polished for an even more beautiful appearance.

Note: Filament with metal particles does not produce a stronger or electrically conductive object; but it does give the 3D object a very natural metallic look. We recommend the use of a hardened steel nozzle for this filament.

Read more about printing with PLA filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	195-220 °C
Brand:	123-3D	Our item no:	DFP06008
Colour:	bronze	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	40-60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA20 BRONZE80	Spool width:	7.8 cm
Max deviation:	+mn ± 0.05 mm

€64.50 (coming soon) (Incl. 23% VAT)
( €52.44 Excl. 23% VAT )

123-3D bronze PLA filament 1.75mm, 1.1kg

Zoom in

Description Our bronze 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01038
Colour:	bronze	RAL colour no:	1036
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D brown PLA filament 1.75mm, 1.1kg

Zoom in

Description Our brown 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01040
Colour:	brown	RAL colour no:	8016
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D birch wood PLA filament 1.75mm, 0.5kg

Zoom in

Description 3D print unique objects with the look and feel of real birch wood. The Birch filament contains 20% wood particles and gives a typical wood smell during printing. After 3D printing, it can be sanded just like fully wooden objects. Because this filament is based on PLA, it is very easy to print with and a heated bed is not necessary. It works with a nozzle of 0.5mm or larger.

Read more about printing with PLA filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	123-3D	Nozzle temp range:	195-215 °C
Colour:	birch	Our item no:	DFP08007
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PLA80 WOOD20	Spool width:	5.5 cm

€39.50 (coming soon) (Incl. 23% VAT)
( €32.11 Excl. 23% VAT )

123-3D oak wood PLA filament 1.75mm, 0.5kg

Zoom in

Description 3D print unique objects with the look and feel of real oak. The oak filament contains 20% wood particles and gives a typical wood smell during printing. After 3D printing, it can be sanded just like fully wooden objects. Because this filament is based on PLA, it is very easy to print with and a heated bed is not necessary. It works with a nozzle of 0.5mm or larger.

Read more about printing with PLA filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	123-3D	Nozzle temp range:	195-215 °C
Colour:	oak	Our item no:	DFP08006
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PLA80 WOOD20	Spool width:	5.5 cm

€39.50 (coming soon) (Incl. 23% VAT)
( €32.11 Excl. 23% VAT )

123-3D fluorescent yellow PLA filament 1.75mm, 1.1kg

Zoom in

Description Our fluorescent yellow 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01042
Colour:	fluorescent yellow	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D fluorescent green PLA filament 1.75mm, 1.1kg

Zoom in

Description Our fluorescent green 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01055
Colour:	fluorescent green	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D fluorescent orange PLA filament 1.75mm, 1.1kg

Zoom in

Description Our fluorescent orange 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01064
Colour:	fluorescent orange	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D yellow PLA filament 1.75mm, 1.1kg

Zoom in

Description Our yellow 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01043
Colour:	yellow	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D yellow-green PLA filament 1.75mm, 1.1kg

Zoom in

Description Our yellow-green 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01045
Colour:	yellow/green	RAL colour no:	6018
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D glow-in-the-dark green PLA filament 1.75mm, 1.1kg

Zoom in

Description Our green glow in the dark 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01056
Colour:	green glow in the dark	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D gold PLA filament 1.75mm, 1.1kg

Zoom in

Description Our gold 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01048
Colour:	gold	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D green PLA filament 1.75mm, 1.1kg

Zoom in

Description Our green 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01058
Colour:	green	RAL colour no:	6016
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D green wood PLA filament 1.75mm, 0.5kg

Zoom in

Description 3D print unique objects with the look and feel of real wood. The wood filament contains 20% green wood particles and gives a typical wood smell during printing. After 3D printing, it can be sanded just like fully wooden objects. Because this filament is based on PLA, it is very easy to print with and a heated bed is not necessary. It works with a nozzle of 0.5mm or larger.

Read more about printing with PLA filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	123-3D	Nozzle temp range:	195-215 °C
Colour:	green wood	Our item no:	DFP08001
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PLA80 WOOD20	Spool width:	5.5 cm

€39.50 (Incl. 23% VAT)
( €32.11 Excl. 23% VAT )

5-7 day delivery

123-3D bright pink PLA filament 1.75mm, 1.1kg

Zoom in

Description Our bright pink 1.75 mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01073
Colour:	hot pink	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

5-7 day delivery

123-3D copper Metal Pro filament 1.75mm, 1kg

Zoom in

Description Copper filament from the Metal series of 123-3D.ie contains about 80% copper. The filament is based on PLA, but is about three times heavier. 3D printed objects have the look & feel of real metal: they feel cool and solid.

3D printing with copper filament is problem-free with both a Direct and Bowden extruder ( nozzle diameter of at least 0.50mm). Copper printed objects can be easily reworked, sanded and polished for an even more beautiful look.

Note: Filament with metal particles does not produce a stronger or electrically conductive object; but it does give the 3D object a very natural metallic look. We recommend the use of a hardened steel nozzle for this filament.

Read more about printing with PLA filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	195-220 °C
Brand:	123-3D	Our item no:	DFP06010
Colour:	copper	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	40-60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA20 COPPER80	Spool width:	7.8 cm
Max deviation:	+mn ± 0.05 mm

€64.50 (Incl. 23% VAT)
( €52.44 Excl. 23% VAT )

5-7 day delivery

123-3D light pink PLA filament 1.75mm, 1.1kg

Zoom in

Description Our light pink 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01075
Colour:	light pink	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D leaf green PLA filament 1.75mm, 1.1kg

Zoom in

Description Our leafy green 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers.You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01060
Colour:	leaf green	RAL colour no:	6002
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D magenta PLA filament 1.75mm, 1.1kg

Zoom in

Description Our magenta 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01062
Colour:	magenta	RAL colour no:	4010
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D mahogany wood PLA filament 1.75mm, 0.5kg

Zoom in

Description 3D print unique objects with the look and feel of real mahogany. The Mahogany filament contains 20% wood particles and gives a typical wood smell during printing. After 3D printing, it can be sanded just like fully wooden objects. Because this filament is based on PLA, it is very easy to print with and a heated bed is not necessary. It works with a nozzle of 0.5mm or larger.

Read more about printing with PLA filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	123-3D	Nozzle temp range:	195-215 °C
Colour:	mahogany	Our item no:	DFP08000
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PLA80 WOOD20	Spool width:	5.5 cm

€39.50 (Incl. 23% VAT)
( €32.11 Excl. 23% VAT )

5-7 day delivery

123-3D neutral PLA filament 1.75mm, 1.1kg

Zoom in

Description Our neutral 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01078
Colour:	transparent	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D nude PLA filament 1.75mm, 1.1kg

Zoom in

Description Our nude 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01076
Colour:	Nude	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D orange PLA filament 1.75mm, 1.1kg

Zoom in

Description Our orange 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01065
Colour:	orange	RAL colour no:	2008
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D purple PLA filament 1.75mm, 1.1kg

Zoom in

Description Our purple 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01067
Colour:	purple	RAL colour no:	4005
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D silver PLA filament 1.75mm, 1.1kg

Zoom in

Description Our silver 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01088
Colour:	silver	RAL colour no:	9006
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D silver PLA filament 1.75mm, 3kg

Description Our silver 1.75mm PLA filament has been improved! It has an improved composition and is better wound on the spool but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers.

Read more about printing with PLA filament here.

Specifications

Amount:	3 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01089
Colour:	silver	RAL colour no:	9006
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 30.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	10.0 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€49.50 (Incl. 23% VAT)
( €40.24 Excl. 23% VAT )

in stock

123-3D black wood PLA filament 1.75mm, 0.5kg

Zoom in

Description 3D-print unique objects with the look and feel of real black wood. The black wood filament contains 20% wood particles and gives a typical wood smell during printing. After 3D printing, it can be sanded just like fully wooden objects. Because this filament is based on PLA, it is very easy to print with and a heated bed is not necessary. It works with a nozzle of 0.5mm or larger.

Read more about printing with PLA filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	123-3D	Nozzle temp range:	195-215 °C
Colour:	black wood	Our item no:	DFP08004
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PLA80 WOOD20	Spool width:	5.5 cm

€39.50 (Incl. 23% VAT)
( €32.11 Excl. 23% VAT )

5-7 day delivery

123-3D sulfur yellow PLA filament 1.75mm, 1.1kg

Zoom in

Description Our sulfur yellow 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01047
Colour:	Zwavelgeel	RAL colour no:	1016
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
( €19.92 Excl. 23% VAT )

in stock

123-3D chameleon yellow-pink PLA filament 1.75mm, 1kg

Zoom in

Description The multicoloured chameleon 1.75mm PLA filament from 123-3D.ie has a beautiful shine. The most special thing about this filament is the unique colour change. Be enchanted by this beautiful yellow-pink chameleon filament and print extra striking 3D designs with it!

This PLA filament is stronger and is less brittle than standard PLA. In addition, it has all the advantages of PLA: it is biodegradable, does not warp, does not deform and leaves little odour during 3D printing. A heated bed is not necessary.

Read more about printing with PLA filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	205-230
Brand:	123-3D	Our item no:	DFP11068
Colour:	yellow pink	RAL colour no:	-
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Length:	330 m	Outer diameter:	Ø 20.0 cm
Material:

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

1.75mm PLA

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

1.75mm PLA