The GEEETECH Mizar S measures 362mm x 377mm x 653mm and has a build volume of 255mm x 255mm x 260mm. It is equipped with a 32-bit MCU, a dual Z-axis and a silent driver. The combination of a high quality MCU and a double Z-axis result in a stable and precise printing platform. The driver ensures that the noise level during printing is limited to a maximum of 50 dB, so that you do not experience noise nuisance.
The way in which the printer calibrates the print bed also helps with a good result; the GEEETECH Mizar S has both an ABL (auto bed levelling) and a manual calibration function, with which the position of the nozzle in relation to the print bed can be adjusted very precisely.
When there is a power failure or if the printer stops for any other reason, the Mizar S remembers the progress of the print and automatically resumes when the printer is working again. The same is true when the filament runs out or jams; the printer will stop and resume printing when the problem is resolved. This way you don't waste any filament.
